Comparing Ratchet Binders with Lever Binders

Yale RLSP Ratchet Load BinderPeople often find it difficult to choose between ratchet binder and lever binder as they have little information on the use of chain binders. So what does a chain binder refer to? Chain binders are often termed as load binders and they are used to tighten chains that are deployed to secure loads during the transportation process. Chain binders are of two types- ratchet binders and lever binders. The two types of binders are differentiated in terms of the binder tightening method that is deployed under different circumstances.

In a ratchet binder, you will find two types of machines, a handle and two tension hooks on either side. The handle performs the role of a lever and the binder features the screw thread as well. The combined use of these simple machines allows you to magnify the force that you apply manually to the tie-down assembly. In other words, you will need to put lesser pulling force on the handle to apply pressure compared to the degree of effort that you will need to put with a lever binder. Additionally, ratchet binders promote slower and steadier loading and unloading of forces, which, in turn, allows you to stay safe from stress or strain.

With ratchet binders, you can expect safer take-ups. The take-up distance of a ratchet binder is twice that of a lever binder and ranges from eight to ten inches. While you may end up spending a few extra minutes during take-up with a ratchet builder, you will benefit from a controlled and safer operation. Lever binders, on the other hand, consist of a simple lever and tension hooks on both the ends. You can use the lever to apply force to a tie-down.

A lever binder, on the other hand, is a simpler structure featuring a tension hook on the either side. With this lever, you can amplify the force that you will exert on a tie-down. The binder is hinged and it gets locked after the lever completes a 180-degree rotation around the hinge. This is an easy-to-use machine that can be maintained with minimal efforts.

The lever binders and ratchet binders work in a similar way, but you need to make sure that you adopt certain security measures to promote safe equipment use. Wear gloves to ensure a tighter grip on the handle. The lever binder should be completely locked to prevent the load from getting shifted. It is not a good idea to use cheater bars to raise the degree of the tie-down force. This is mainly because of the fact that cheater bars can put undue pressure on the tie-down, which may eventually lead to tie-down breakage. It is always recommended that you adopt a slow and steady approach to undertake the ratcheting process.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s